Don't Buy Into These "Trends" Concerning Toyota Replacement Car Keys
Toyota Replacement Car Keys
Modern car keys have electronic circuitry, in addition to the physical key. The reprogramming of these can cost money because of strict codes and a need to comply with regional regulations.
There are ways to save on Toyota keys to replace your car while you travel around Belton and Killeen. The best option is to keep a spare key.
Lost Keys
In the past, losing a car key was fairly easy to replace, and you could get the replacement for relatively inexpensive at your local hardware store or automotive locksmith. However, now that cars are more technologically advanced keys are now more costly to replace. This is due to transponder chip and proximity key technologies can prevent you from being able to start your car without the correct key fob. This is one of the reasons that we strongly recommend keeping a spare key in your car.
Losing your Toyota remote key or key fob (also known as proximity key) could be a costly and complicated situation. These keys emit an electronic code that disables your engine immobilizer which is designed to prevent potential thieves from hot-wiring the car and stealing it.
To get a replacement fob, you must bring your car to the dealership with photo identification and proof of ownership documents. The dealer will then purchase the new key and get it electronically linked to your car. The cost for this is usually between $200 and $250.
You can save money by purchasing a replacement key online however the quality of these keys from third parties can vary greatly. Some are finicky and often break after a short period of time. Some might not work and could cause damage to the computer system of your Toyota.
Fortunately our mobile locksmiths are well experienced in dealing with the challenges of modern keys for cars. They're not only experts in fixing issues, but also in designing new keys that seamlessly sync with your Toyota's advanced system. We can remotely program your key fob into your vehicle and replace it.
It is possible to "reflash" your Engine Control Computer to accept the key. This is dependent on the year and complexity of your Toyota's keyless entry system. start. This process will replace the data stored on the computer chip with virgin (clean) data. It's similar to when you format your computer's hard drive to start over.
Transponder Chip Issues
Chipped keys, also known as transponder keys, have been around for some time and are a great anti-theft tool. They prevent car thieves from hot-wiring a vehicle and thereby starting it. They accomplish this by using an embedded microchip that transmits signals to your car when inserted into the ignition.
These signals are radio waves which activate the chip. Once activated the chip will respond with a response code that is recognized by your vehicle. It's similar to sending your driver's permit to the bank clerk. When the key is inserted into the ignition, it will begin to start the car and unlock the doors.
If you lose your chipped keys you'll have to replace them with a brand new one. This will cost more because it's more advanced. It's nevertheless worth the extra investment because you're protecting your vehicle from thieves who want to take it away.
It is important to understand that not all locksmiths or hardware stores will provide this service. You will likely need to go to your local Toyota dealership to get this service done. This is because they have the best chance of recognizing your key. They can also program your key into your car.
This involves connecting the key with an specialized programer that extracts the required information needed for your car's computers to recognize it. It will then match your key's code to a transponder and then program it into the car's computer system. This will prevent your car from starting with any other key.
Despite this amazing technology, your keys with chip can stop working at times. You might notice this if the key isn't turning on the engine or open your doors. If this happens, it's most likely that something is wrong with your transponder chip.
To fix this issue, you'll be required to visit your local Toyota dealership and have the chip reprogrammed to your vehicle. You'll need your photo ID and the VIN number of your vehicle to the dealership to do this.
Key Fob Battery Issues
If you have a key fob that's stopped working, it could be time to replace the battery. It can be very difficult to live with a dead or dying key fob, but this is usually something you can fix relatively easily. This issue can be caused by a variety of factors however, the most common cause is simply a requirement for an entirely new battery for the car key fob.
The first step is to open the case. It should be easy to open the case. Just insert the flat tool such as a screwdriver into the slot where the key is. This will allow you to access the green circuit board and you can then remove the old battery. Be sure to note the type of battery you require (which is typically written on the original, or can be found in the owner's manual); then get an alternative and replace it. Make sure that the new battery is seated correctly inside the circuit board and case and then test it to make sure it's working properly.
Overuse can also cause a keyfob's battery to fail quickly. Using your fob frequently will drain the battery faster than the case if you only used it once or twice and it can be difficult to avoid. Extreme temperatures, moisture and electrical interference caused by other electronic devices can cause batteries to die quickly. To prolong the life of your key fob, keep it away from these objects.
If you have a key fob that requires multiple clicks to lock or unlock, it is likely that you need to replace it. A functioning fob should be able to activate with just one click, and having to press it repeatedly could indicate that the battery is becoming low. If you notice that your fob's battery is beginning to corrode, it's a good idea for a new one to be installed. This is due to the amount of metals and electronic components in your car. key toyota can cause a short to occur within the battery or other components of the key fob.
Contact Us
Contact us if having issues with your Toyota remote or key fob. We'll be able to offer a new battery for your key fob, or replace the one that's lost. It will be installed quickly and without scratching.
A broken circuit board transponder chip, or a worn-out battery can all cause the vehicle to stop working. It is essential to know what kind of key fob you have in your Toyota to ensure that you purchase the correct replacement battery.
Toyota key fobs are available in various sizes and shapes. They are designed with sophisticated security features to prevent the unauthorized access to your vehicle. They also have a transponder chips that communicate with your immobilizer system, allowing your engine to start only after the proper key is placed in the correct key.
The first thing you should do when your key fob stops turning on or has stopped working completely is to go back through your steps and look for places you normally set it down. If you're still unable locate your keys, you should contact a locksmith or dealership that specializes in automotive key fobs. They can help you find your keys or get a new one while you wait.
A reputable locksmith or dealership should be able to create a new key for your Toyota provided you have the key number. The process will typically involve cutting the new key and programming it to work with your immobilizer system. The locksmith or dealer will then test the key to ensure that it can unlock and lock your doors, and even start the engine.
It is suggested that you keep a spare key for your Toyota. This will prevent you from being locked out of your car and being stranded in nowhere. A spare key will also make it much easier to get your keys replaced when they wear out or become damaged by regular use. You can put the spare key in a secure place and then use the free Toyota Key Finder app on your smartphone to locate it when you need it.